It’s the best feeling when you get home after a long day and can just relax and feel safe. But what if your roof isn’t providing the protection you need? We’re going to go over four ways that professional roofers can inspect your roof to help you feel more comfortable and secure in your home.
Sometimes, it’s hard to tell if your roof needs some TLC, so you don’t know whether or not to call a professional like Palmetto Roofing And Solar. You might only see leaks or other damage when the problem has already gotten pretty bad. But proper roof inspection is essential for preventive measures and maintenance, so don’t be afraid to call in the pros for an inspection before disaster strikes.
We’re about to show you four simple ways that a professional roofer will inspect your roof so that you know what to expect from your inspection appointment.
1) Interior Inspection
When a roofer first arrives at your house, he will want to inspect the interior of your home for any signs of leaks or water damage. He will also want to check for any other signs of moisture, such as mold and/or mildew. This inspection process is very important because it lets the roofer know if there are any issues that may require him to replace parts or all of your roof. It also helps him figure out if there are any areas that need to be repaired in order to keep your home safe.
This process usually takes about twenty minutes depending on how much work needs to be done. You should expect an estimate after this time has elapsed, but keep in mind that sometimes estimates can take longer if there are many different problems with your roof.
During this process, make sure you ask questions about what exactly he will be looking for when he does his inspection. If you don’t understand something about this process, then you might want to ask for more detailed information from another professional before hiring them to do the work on your home.
2) Structural Inspection
A structural inspection is an inspection that involves taking an in-depth look at the structural integrity of your roof as well as any other structural components of your home. A good structural inspection will involve both a visual and hands-on inspection of the roofing structure, including gutters, roof vents, and chimneys. The inspector will also look for signs of damage to the roof decking and make sure that there are no weak spots where water can get through.
3) Workmanship Inspection
This inspection is for the purpose of finding any defects in workmanship. For example, if the nails used to hold down the roofing were not installed properly, a roof will leak. This inspection will also check for wind damage or hail damage. The roofer may climb onto the roof to do this inspection.
If the contractor does not want to get onto your roof or there are areas that he cannot see from the ground, he may use binoculars, or a camera attached to a telescoping pole. This type of inspection will usually take 30 minutes or less unless there are problems that require further investigation.
4) Material Inspection
Roofing material is a big concern for homeowners and inspectors alike. If the material on your roof is defective, the inspector will need to know what kind of material it is so they can recommend a replacement. This includes the type of shingles, slate, or metal used on your roof as well as the manufacturer.
The inspector will also look at the flashing in your home, which is the material that is used to prevent water from seeping into your home around chimneys and vents. Flashing can become damaged over time and can need to be replaced.